NewsStackNewsStack
Daily Brief: Which companies are hyping vs delivering: red flags, real signals and repeat offenders, free daily.

Union Power Metals Confirms Historical Manganese Mineralization in First Modern Drill Holes at Michalová, Slovakia

17 Nov 2026🟢 Mild Positive
Share𝕏inf

First modern drilling at Michalová visually matches 1950s manganese records; assays pending.

What the company is saying

Union Power Metals Corporation (CSE:UPPR, OTCQB:UPERF, FSE:UPR) reports that its first two modern drill holes at the Michalová manganese project in Slovakia intersected near-surface manganese oxide mineralization at depths and thicknesses closely matching those recorded in 1950s state exploration. The company frames this as an encouraging first step in verifying the reliability of a large historical dataset comprising about 290 drill holes and nearly 500 assayed intervals. CEO Derrick Dao emphasizes that the twin holes found manganese where historical geologists recorded it, providing initial confidence in the archival data, but explicitly states that laboratory assays are still pending and will determine grade confirmation. The release details the technical objectives: verifying historical data through twin-hole drilling and collecting fresh material for metallurgical testwork targeting battery-grade manganese products. The company is transparent about the current stage, noting that only visual estimates are available and that no conclusions about economic viability or battery-grade suitability can yet be drawn. The tone is cautiously optimistic, with a focus on methodical validation rather than promotional claims.

What the data suggests

The disclosed results show that twin holes V-13 and V-11 intersected manganese oxide mineralization at depths and thicknesses within one metre of those recorded in the 1950s, with V-13 intersecting 3.4 metres from 10.0 metres and a further 0.9-metre layer from 6.5 metres, and V-11 intersecting 2.2 metres from 7.7 metres. Core recovery through all mineralized intervals was 100%. Visual estimates of manganese mineral content in V-13 were 80% for the main layers, and in V-11 ranged from 50% to 25% and 10–15% in subsequent intervals, but these are not laboratory assays and no grade should be inferred. Historical sampling for M-96 returned a composite of 4.5 metres at 9.0% Mn, including 1.0 metre at 12.7% Mn; M-114 returned 2.8 metres at 11.2% Mn, including 0.4 metres at 18.3% Mn and 1.0 metre at 14.2% Mn. The company has delivered core samples to ALS for analysis, with laboratory assays pending. The 25-hole drill program is ongoing, and further twin holes and metallurgical testwork are planned. No resource estimate, economic assessment, or production timeline is presented at this stage, and the company is explicit that economic viability and battery-grade suitability remain unproven.

Analysis

The announcement provides a factual and detailed update on the initial results from the first modern drill holes at the Michalová manganese project in Slovakia. The language is generally proportionate to the evidence: the company reports that visual confirmation of mineralization matches historical records, but explicitly states that laboratory assays are pending and that no conclusions about grade or economic viability can yet be drawn. The majority of claims are realised (drill intersections, core recovery, sampling delivered for analysis), with a significant portion forward-looking (pending assays, further drilling, metallurgical testwork). There is no evidence of exaggerated claims about economic potential or imminent production, and the company is transparent about the need for further technical work. No large capital outlay or immediate financial impact is disclosed. The gap between narrative and evidence is minimal, with the only mild inflation being the use of 'confirmed' in reference to mineralization, when only visual confirmation is available.

Risk flags

  • ●Laboratory assays are pending, so no grade confirmation is available; visual estimates alone cannot establish economic potential. If assays return lower-than-expected grades, the project's value proposition could materially weaken.
  • ●The reliability of the entire historical dataset remains unproven; only two twin holes have been drilled and compared so far. Broader verification across the remaining 25-hole program is necessary before the historical data can be relied upon for resource estimation.
  • ●No resource estimate, economic assessment, or metallurgical results are available; the project is at an early exploration stage with unproven economic viability. There is a risk that further technical work may not support development toward battery-grade manganese products.
  • ●Historical data were collected using undocumented sampling and analytical methods in the 1950s, introducing uncertainty about comparability and accuracy. The company acknowledges that historical results have not been verified and are presented for context only.

Bottom line

Union Power Metals' first modern drill holes at Michalová visually confirm the presence and thickness of manganese oxide mineralization reported in 1950s state exploration, but no laboratory assay results or grade confirmation are yet available. The technical disclosure is detailed and transparent, with clear acknowledgment that economic viability and battery-grade suitability remain unproven and contingent on further results. The company's approach—systematic twin-hole drilling and methodical validation of historical data—adds credibility, but the investment case hinges on pending assays and subsequent metallurgical work. Investors should watch for laboratory results from ALS and updates on the remaining holes in the 25-hole program. The single most important takeaway is that while initial drilling supports the reliability of historical records, the project's economic potential cannot be assessed until assay results and further technical work are complete.

Track record

NewsStack has analysed 2 announcements from UPPR since May 2026.

Likely Overhyped: 1Mild Positive: 1

Previous UPPR verdicts

Announcement summary

(CSE: UPPR) (OTCQB: UPERF) (FSE: UPR) Union Power Metals Corporation reported that the first modern drill holes at its Michalová manganese project in central Slovakia have confirmed the manganese mineralization recorded by historical drilling in the 1950s. Twin holes V-13 and V-11 both intersected near-surface manganese oxide mineralization at depths and thicknesses comparable to those in the historical logs. V-13 was collared at the recorded location of historical hole M-96, while V-11 was collared approximately 8 metres from the recorded location of historical hole M-114. V-13 intersected 3.4 metres of black manganese oxide mineralization from 10.0 metres, with a further 0.9-metre layer from 6.5 metres. V-11 intersected 2.2 metres of mineralization from 7.7 metres. Core recovery through the mineralized intervals was 100%. The Michalová archive contains approximately 290 historical drill holes and nearly 500 assayed intervals. Core from the completed holes has been sampled and delivered to ALS for analysis, and representative oxide and carbonate composites are being assembled for metallurgical testwork. Laboratory assays are pending. The drill program has two objectives: to verify historical exploration data by drilling twin holes and to obtain fresh material for metallurgical testwork aimed at battery-grade manganese products. V-13 was drilled vertically to a depth of 25.9 metres, intersecting two layers of manganese mineralization: an upper layer from 6.5 to 7.4 metres and a main layer from 10.0 to 13.4 metres. Historical hole M-96 (total depth 18 metres) was sampled from 10.5 to 15.0 metres in the 1950s, returning a weighted average of 4.5 metres at 9.0% Mn, including 1.0 metre at 12.7% Mn. V-11 was drilled vertically to a depth of 25.7 metres, with the main mineralized interval from 7.7 to 9.9 metres. Historical hole M-114 (total depth 16 metres) was sampled from 8.6 to 11.4 metres, returning a weighted average of 2.8 metres at 11.2% Mn, including 0.4 metres at 18.3% Mn and 1.0 metre at 14.2% Mn. Visual estimates of manganese mineral content in V-13 were 80% for the upper and main layers, and 50% and 10% for subsequent layers; in V-11, estimates were 50%, 25%, and 10–15% for respective intervals. Historical sampling results for M-96 included intervals such as 0.50 metres at 1.63% Mn, 0.35 metres at 1.21% Mn, 0.50 metres at 9.49% Mn, 1.00 metre at 11.99% Mn, 1.00 metre at 12.69% Mn, 1.00 metre at 7.83% Mn, and 1.00 metre at 3.31% Mn. For M-114, intervals included 0.40 metres at 18.33% Mn, 1.00 metre at 9.02% Mn, 1.00 metre at 14.21% Mn, and 0.40 metres at 1.90% Mn. The historical drill logs and sampling results are contained in the final exploration report held by the Slovak Geological Archive (GEOFOND, inventory number 13698). The current twin-hole program is designed to test the reliability of this historical information, and the 2026 laboratory assays, when received, will provide the first modern analytical data for these locations. Drilling of the remaining holes of the 25-hole program is planned to continue. The Michalová deposit is located in the Banská Bystrica Region of central Slovakia. The scientific and technical information in this release has been reviewed and approved by Lorne Warner, P.Geo., a director of the Company and a Qualified Person as defined by National Instrument 43-101. Derrick Dao is the Chief Executive Officer of Union Power Metals Corporation.

Disagree with this article?

Ctrl + Enter to submit