NewsStackNewsStack
Daily Brief: Which companies are hyping vs delivering: red flags, real signals and repeat offenders, free daily.

Glenstar Minerals Plans Ten Phase 3 Drill Holes at Green Monster Project Discovery Zone

18 Nov 2026🟢 Mild Positive
Share𝕏inf

Glenstar plans 10 new drill holes at Green Monster, targeting geophysical anomalies.

What the company is saying

Glenstar Minerals Inc. (CSE:GSTR, OTCQB:GSTRF, FSE:VO20) is announcing the identification of nine collar locations for ten proposed Phase 3 reverse circulation drill holes at its Green Monster Project in Clark County, Nevada. The company frames this as a technically driven next step, integrating Phase 2 drill results and a recently completed Terēan Shear-Wave Seismic Geophysical Survey. They emphasize that numerous polymetallic zones were encountered in Phase 2, with geological complexity and confirmed mineralization around discovery hole GMST-4, which led to the seismic survey. The announcement highlights that the seismic survey identified several interpreted low-velocity zones and structural discontinuities, which are now considered high-quality targets for the next drilling phase. Glenstar is transparent that these are interpretations, not proven mineralized zones, and that only drilling and analytical testing will establish presence, grade, and continuity. The company is preparing an application to the United States Bureau of Land Management for regulatory authorization. Project Manager and Qualified Person Bob Marvin is quoted to reinforce the technical rationale and the value of integrating geophysical and geological data.

What the data suggests

The company plans to drill ten reverse circulation holes from nine collars, totaling 4,795 feet (1,461.52 metres), with individual hole depths ranging from 106.68 to 182.88 metres. The proposed holes (GMST-12 through GMST-20, including GMST-14A) are sited to test interpreted low-velocity zones and structural discontinuities identified by the Terēan shear-wave seismic survey. Previous channel sampling returned 1.18 metres of 3.77% copper, 3.06% nickel, 0.21% cobalt, and 6.83% zinc, while boulder sampling confirmed very high zinc (>10%) and silver (>200ppm), as well as copper, uranium, and lead. The Green Monster Property comprises 35 federal lode claims over approximately 700 acres. No resource estimate, economic assessment, or new assay results are disclosed in this update. The technical data is reviewed and approved by a Qualified Person, lending credibility to the geological interpretations. The company is clear that the geophysical anomalies are preliminary and not proof of mineralization.

Analysis

The announcement provides a detailed and technically specific update on Glenstar Minerals Inc.'s exploration planning at the Green Monster Project. The tone is positive, but the language is measured and appropriately caveated, especially regarding the forward-looking nature of the Phase 3 drilling program. The company clearly distinguishes between realised facts (e.g., completed sampling, assay results, and geophysical survey interpretations) and future plans (e.g., proposed drilling subject to regulatory approval). There is no evidence of exaggerated claims or narrative inflation; the company explicitly states that the presence, grade, and continuity of mineralization in new targets can only be established through future drilling and analysis. No large capital outlay or immediate financial impact is disclosed, and the technical data is reviewed by a Qualified Person, supporting credibility. The gap between narrative and evidence is minimal, with all forward-looking statements appropriately qualified.

Risk flags

  • ●There is significant geological risk, as the interpreted low-velocity zones and structural discontinuities identified by the seismic survey may not correspond to economically significant mineralization. The company acknowledges that only drilling and analytical testing can confirm grade and continuity.
  • ●Regulatory risk is present, since the Phase 3 drilling program is contingent on receiving approvals from the United States Bureau of Land Management. Delays or denials could postpone or prevent the planned work.
  • ●Operational risk exists because the geophysical interpretations are preliminary, and the technical complexity of fractured, altered, and decalcified rock may complicate drilling or sampling, potentially impacting the ability to obtain representative results.

Bottom line

Glenstar Minerals is advancing its Green Monster Project with a technically justified plan for ten new drill holes targeting geophysical anomalies identified by a recent seismic survey. The company provides detailed proposed hole depths and locations, and past sampling has shown high grades of copper, nickel, cobalt, and zinc, but no new assay results or resource estimates are included in this update. The entire Phase 3 program remains subject to regulatory approval, and the actual presence and continuity of mineralization at the new targets is unproven until drilling is completed. The technical approach is credible, with oversight from a Qualified Person, but investors should recognize that the step from geophysical anomaly to economic discovery is substantial. The most important next milestone will be securing BLM approval and commencing drilling; until then, the announcement signals technical progress but not yet a value-creating discovery.

Announcement summary

(CSE:GSTR) (OTCQB:GSTRF) (FSE:VO20) Glenstar Minerals Inc. has identified nine collar locations for ten proposed Phase 3 reverse circulation (RC) drill holes at its Green Monster Project in Clark County, Nevada. The new Phase 3 targets were selected following an extensive review of Phase 2 drill results and the recently completed Terēan Shear-Wave Seismic Geophysical Survey. Numerous polymetallic zones were encountered during the Phase 2 program, with highly fractured rock, abundant clay alteration, orange and red oxide minerals, and decalcification observed. Assay results confirmed mineralization and geological complexity around discovery drill hole GMST-4, prompting the Terēan seismic survey to further evaluate structural interpretations. The seismic survey identified several interpreted low-velocity zones and structural discontinuities, some of which are near previously encountered geological features, including those associated with GMST-4. Glenstar interprets these low-velocity zones as high-quality targets for Phase 3 drilling, but notes that the presence, grade, and continuity of mineralization can only be established through drilling and analytical testing. The proposed Phase 3 program comprises ten RC drill holes from nine collars, subject to final drill planning and regulatory authorization, and is designed to investigate interpreted low-velocity zones, structural discontinuities, and geological features associated with alteration and mineralization. Proposed holes GMST-12 through GMST-20, including GMST-14A (which will be drilled east at a 70° angle from the same collar as GMST-14), will evaluate selected geophysical anomalies and investigate the potential lateral and vertical extent of prospective geological features. The company is preparing the necessary application to the United States Bureau of Land Management (BLM) for the proposed Phase 3 drilling program, with drilling subject to receipt of all required approvals and authorizations. The total planned drilling for Phase 3 is 4,795 feet (1,461.52 metres) across ten holes. Specific proposed hole depths include GMST-12 at 114.30 metres, GMST-13 at 152.40 metres, GMST-19 at 106.68 metres, GMST-14 at 114.3 metres, GMST-14A at 182.88 metres, GMST-20 at 144.78 metres, GMST-15 at 182.88 metres, GMST-16 at 143.26 metres, GMST-17 at 152.40 metres, and GMST-18 at 167.64 metres. The Green Monster Property consists of 35 federal lode claims covering approximately 700 acres in Clark County, Nevada, about 40 miles southwest of Las Vegas. Until drilling in May 2025 and February 2026, no drilling had been conducted on the property. Previous sampling in 2022 identified robust nickel-copper with anomalous cobalt, leading to shallow RC drilling targets. Channel sampling across the exposed back of a raise off the main shaft returned 1.18 metres of 3.77% copper, 3.06% nickel, 0.21% cobalt, and 6.83% zinc. Sampling of oxide and sulfide bearing boulders downhill of the patented workings confirmed very high zinc (>10%) and silver (>200ppm), as well as copper, uranium, and lead. The scientific and technical information in the release was reviewed and approved by Robert Marvin, P.Geo. (Ontario), an independent consulting geologist and Qualified Person as defined by NI 43-101. David Ryan is President & CEO of Glenstar Minerals Inc.

Disagree with this article?

Ctrl + Enter to submit