Questcorp Mining and Riverside Resources Commence Phase 2B Drilling at Luis Hill, La Union Project, Sonora, Mexico
Questcorp and Riverside have started Phase 2B drilling at La Union, targeting deeper gold zones.
What the company is saying
Questcorp Mining Inc. (CSE:QQQ, OTCQB:QQCMF, FSE:D910) and Riverside Resources Inc. announce the start of Phase 2B reverse circulation drilling at the Luis Hill target within the La Union Project in Sonora, Mexico. The company frames this as a follow-up to a prior intercept of 42 metres grading 0.3 g/t gold, emphasizing the goal to probe deeper into a newly identified +1 km induced polarization anomaly and test the extent of shale beds. At the Union Mine target, they highlight historic chip channel sampling of 30 metres grading 20.2 g/t Au, 226 g/t Ag, and 2.7% Zn, and plan to test the continuity of the feeder structure and three potentially mineralized mantos. Saf Dhillon, President and CEO of Questcorp, stresses the efficiency and cost-effectiveness of RC drilling for advancing their geological model and signals that results will be shared as available. John-Mark Staude, President and CEO of Riverside, underscores the faster progress and larger sample volumes enabled by RC drilling and positions this phase as a setup for further exploration. The technical content is reviewed and approved by R. Tim Henneberry, P. Geo (BC), a director and Qualified Person under NI 43-101.
What the data suggests
The announcement confirms that Phase 2B drilling is underway, with a near-vertical hole at Luis Hill planned to approximately 350 metres depth, targeting a +1 km IP anomaly and deeper sediment-hosted mineralization. The prior Phase 1 intercept at Luis Hill was 42 metres grading 0.3 g/t gold, but no new assay results are disclosed. At Union Mine, historic chip channel sampling returned 30 metres grading 20.2 g/t Au, 226 g/t Ag, and 2.7% Zn, but this is not new data; the current drilling aims to test continuity and the presence of three stacked mantos. The program plans about 600 metres of RC drilling in two holes. Questcorp holds a 100% interest in 1,168.09 hectares at North Island Copper (British Columbia) and an option to acquire 100% of 2,520.2 hectares at La Union (Mexico), both subject to royalty obligations. All technical disclosures are reviewed by a Qualified Person. No resource estimate, economic assessment, or new drill results are presented, so the announcement is strictly an operational update.
Analysis
The announcement is proportionate in tone, focusing on the factual commencement of Phase 2B drilling at the La Union Project and providing specific technical details such as planned metres, target depths, and historic sampling results. Most claims are realised and relate to operational progress (drilling underway, property holdings, prior intercepts), with only a minority being forward-looking (e.g., testing new targets, potential for further drilling). There is no evidence of exaggerated language or narrative inflation; the technical content is reviewed by a Qualified Person under NI 43-101, lending credibility. No large capital outlay or financial projections are disclosed, and the operational plans are typical for an exploration-stage company. The benefits of the current drilling program (assay results, resource definition) are expected in the near term, once results are available. The gap between narrative and evidence is minimal, as the company avoids promotional or aspirational statements and sticks to concrete operational updates.
Risk flags
- ●There is no disclosure of new assay results or resource estimates, so the investment case currently rests on historic sampling and early-stage drilling; if the new holes do not intersect significant mineralization, project momentum could stall.
- ●The mineralized zone at Luis Hill is described as open along strike and at depth, but this is not substantiated by new data in the release, so the actual extent and grade continuity remain unproven.
- ●Both the North Island Copper and La Union properties are subject to royalty obligations, which could impact future project economics if commercial production is achieved.
- ●The company's interest in the La Union Project is currently an option to acquire 100%, not a completed acquisition, so there is residual title and execution risk until the option is fully exercised.
Bottom line
Questcorp and Riverside have moved from planning to active drilling at the La Union Project, with the RC rig now operating at Luis Hill and targeting deeper gold zones beneath a prior 0.3 g/t gold intercept. The program also aims to test high-grade historic zones at Union Mine, where past chip sampling returned 20.2 g/t Au, 226 g/t Ag, and 2.7% Zn over 30 metres. No new assay results or resource estimates are disclosed, so the update is operational rather than value-defining. The company holds a 100% interest in 1,168.09 hectares at North Island Copper and an option on 2,520.2 hectares at La Union, both subject to royalties. The next material catalyst will be assay results from the current drilling; until then, the investment case is based on technical potential and historic grades, not demonstrated new discovery. Investors should focus on whether upcoming drill results confirm or expand on the historic mineralization and whether the option on La Union is fully exercised.
Announcement summary
(CSE:QQQ) (OTCQB:QQCMF) (FSE:D910) Questcorp Mining Inc., together with its joint venture partner and operator Riverside Resources Inc., has commenced Phase 2B reverse circulation (RC) drilling at the Luis Hill target at the La Union Project, Sonora, Mexico. The Phase 2B program at Luis Hill will follow up on the Phase 1 intercept of 42 metres grading 0.3 g/t gold in sediment-hosted mineralization, probing deeper to test a newly identified +1 km induced polarization (IP) geophysical target and the extent of shale beds encountered during core drilling. The mineralized zone at Luis Hill remains open along strike and at depth. At the Union Mine target, drilling will test the continuity of the feeder structure and three potentially mineralized stacked mantos near historic workings, where chip channel sampling returned 30 metres grading 20.2 g/t Au, 226 g/t Ag, and 2.7% Zn. Approximately 600 metres of RC drilling is planned in two holes, with the first, a near-vertical hole to a planned depth of approximately 350 metres at Luis Hill, currently underway. Saf Dhillon, President and CEO of Questcorp, stated that the RC rig is now turning at Luis Hill and that Phase 2B has moved from preparation to drilling, with the current hole designed to go deeper than previous drilling and test the IP chargeability anomaly beneath the Phase 1 gold intercept. John-Mark Staude, President and CEO of Riverside, commented that RC drilling offers faster progress and larger sample volumes, and that completion of Phase 2 will position the joint venture for the next phase of drilling. The Phase 2B hole at Luis Hill is designed to test the IP chargeability anomaly and mineralized horizon, as Phase 2A hole UND26-018 did not reach target depth. At Union Mine, the structure is hosted in the Clemente Formation, a major carbonate replacement deposit (CRD) host unit, and the planned Phase 2B hole will test the continuity of the feeder structure and for three potentially mineralized stacked mantos projected southward from the main historic mineralized zone. Phase 2A hole UND26-013 intersected the continuation of the historic Sproul manto near former underground workings. Questcorp holds an undivided 100-per-cent interest in mineral claims totaling 1,168.09 hectares comprising the North Island Copper property on Vancouver Island, British Columbia, subject to a royalty obligation. The company also holds an option to acquire an undivided 100-per-cent interest in mineral claims totaling 2,520.2 hectares comprising the La Union Project in Sonora, Mexico, subject to a royalty obligation. The technical content of the news release was reviewed and approved by R. Tim Henneberry, P. Geo (BC), a Director of the Company and a Qualified Person under National Instrument 43-101.
Disagree with this article?
Ctrl + Enter to submit